null
iSaveTractors

Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines

(67 reviews) Write a Review
SKU:
CAR01021
UPC:
8809093342866
  • Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines
  • Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines
  • Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines
  • Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines
  • Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines
  • Carburetor Bundle Pack for K321, K341, K361, M14, and M16 Engines
SOLD OUT. NO PRE-ORDER AVAILABLE
Frequently bought together:

Description

 
Carburetor Bundle Pack for Kohler K321, K341, K361, Magnum M14, and M16 engines.

 This carburetor is an aftermarket reproduction of the Kohler #30 carburetor. It has a 1.2" Throttle Bore and a 1.0" Venturi. It also will replace the Walbro WHG #60 and WHG #64 Carburetor.

Our Carburetor Bundle includes everything you need to overhaul your old engine's fuel system:
  • Kohler #30 Style Carburetor with Choke Lever Style 2 installed
  • Throttle Linkage 
  •  2 Feet of 1/4" ID, 1/2" OD Fuel Line
  • 6 Hose Clamps
  • Carburetor Intake Gasket
  • Additional Choke Lever for Older Style Kohler K Engines (Choke Lever Style 3)
  • 90 Degree Fuel Fitting
  • Inline Fuel Filter
  • Inline Fuel Shut Off Valve
  • Instructions
View AllClose

Videos

View AllClose

67 Reviews

  • 5

    K341 Carb Bundle

    Posted by Christopher Holm on Sep 14th 2020

    Sweet package of carb goodness. Every part mated perfectly. No adjustments required.

  • 5

    Carburetor

    Posted by Bill on Aug 15th 2020

    Nice product. Well made. Bolted right on and ran great with only minor tuning. Nice to have the new gaskets, fuel line, filter, etc. to go with it. Would buy again!

  • 5

    carb bundle

    Posted by Laurie Kunselman on Aug 13th 2020

    worked perfectly . very easy install

  • 5

    Exactly what I needed along with all the gaskets and fittings

    Posted by Kenneth on Aug 8th 2020

    Had to do one minor revision

  • 5

    End result is fantastic! But not without installation issues

    Posted by JOSEPH BLADEN on Jul 11th 2020

    Had to tap threads deeper for fuel fitting to fit. In doing so, removed the bowl to remove thread cutting chips and found brass float soldering flux debris flaked off in the bowl. Float was way out of adjustment. Had to run tap deeper in air cleaner screen holes. Had to enlarge hole in choke arm for the actuating wire. Still a great value and runs fantastic!

  • 4

    Carburetor for a K341

    Posted by Dan Fossett on Jun 23rd 2020

    Bolted right up had to adjust it a little and also had to drill chocK lever out just a bit bigger. Application was a John Deere 300 l&g tractor. Runs great now. Will definitely buy more products in the future from IST.

  • 5

    Carburetor bundle

    Posted by James on May 27th 2020

    My 2nd review for this product and after some help from norman tractor is running great. Just remember to tighten the fuel inlet elbow on the carb, silly me didn't do that which caused a leak thanks

  • 5

    Carb bundle for my gravely 1987 16hp tractor

    Posted by Bob Turner on May 20th 2020

    I got exactly what I ordered. I ordered the wrong carb. It bolted right up then the fuel linkage did not fit so I used the old carb parts. Same deal with the chock. Now it runs rough if at all. These problems are my own fault for not asking for a little coaching on what =should have been a simple bolt on.

  • 5

    Carburetor

    Posted by Mark Wolfendale on May 14th 2020

    Fitment was a little tighter then original but still bolted right up and came with everything you need to do the job. Parts appear to be good quality

View AllClose

Related Products

Related Products