Internal Engine Parts

iSaveTractors Replacement Cylinder Head for Kohler K241, K301, K321, M10, M12, M14 10HP, 12HP, and 14HP Cast Iron Single Cylinder Engines and Magnum Engines. This is a stock replacement and is modeled after the original 4th generation cylinder head...

iSaveTractors Rubber Grommet for the points cover on your Kohler K Series Engines. Will fit all Kohler K Series Engines that use an ignition point system...

Kohler OEM Valve keepers for Kohler K141, K161, K181, K241, K301, K321, K341, M8, M10, M12, M14, M16, MV16, M18, M20, K482, K532, K582 Engines. Kohler Part Number: 4175510S

Kohler OEM Governor Cross Shaft Kit Kohler Part Number A-235256-S Fits Kohler K241, K301, K321, K341, K361, M10, M12, M14, M16 Engines.

iSaveTractors brand Points Push-rod for Kohler K Series Engines   Replaces: Kohler Part: 4741104-S  

Old Style Needle bearing set for the Balance Gears in your Kohler K Engine.  Replaces Part Number:  236506S  These style needle bearings were used in engines with serial number 9641310 and PRIOR * The best way to determine if your...

Governor Gear for Kohler K241, K301, K321, K341, K361, M10, M12, M14, M16, KT17, KT18, KT19, M18, MV18, M20, MV20 This is a Kohler Original Nylon Governor Gear. Includes steel spacer, and instructions. Replaces: Kohler A235743S

These are High Quality steel shim spacers for your Kohler K and M series Engines. Correct your end play in your camshaft and balance gears with these shims.   Shims are .005" thick    These will fit the following Kohler...

iSaveTractors Valve Guide for Kohler K241, K301, K321, K341, K482, K532, and K582 Engines. Will also Fit M10, M12, M14, M16 Magnum Series Engines. Specs: ID: 0.309" OD: 0.625" Length: 2.129" Replaces: Kohler:...

Oil Pan Gasket for Kohler K241, K301, K321, K341 Engines This gasket is for narrow base engine blocks Replaces Koher: 235353 235353S

Needle bearing set for the Balance Gears in your Kohler K Engine. If you are rebuilding your engine and it is equipped with the balance gears you want to replace these bearings too! Replaces Part Number:  47 030 01-S  These style needle...

IST brand Crankshaft Bearings for your Kohler K Engines! These match Kohler OEM Specs and are High Quality Replacements.    Sold by the pair   These will fit the following Kohler Engines: Kohler K241, K301, K321, K341 Kohler M10,...