null

Carburetor #30 for Kohler K321, K341, K361, M14, and M16

(100 reviews) Write a Review
SKU:
CAR01007
UPC:
8809093341869
  • Carburetor #30 for Kohler K321, K341, K361, M14, and M16
  • Carburetor #30 for Kohler K321, K341, K361, M14, and M16
  • Carburetor #30 for Kohler K321, K341, K361, M14, and M16
  • Carburetor #30 for Kohler K321, K341, K361, M14, and M16
  • Carburetor #30 for Kohler K321, K341, K361, M14, and M16
  • Carburetor #30 for Kohler K321, K341, K361, M14, and M16
$69.99
Frequently bought together:

Description

iSaveTractors Brand Aftermarket Carburetor for all Kohler K321, K341, K361, M14, and M16 engines.
 
The choke levers that come with this carburetor allow it to work with a direct choke connection, a choke system that uses additional choke levers on the engine's blower housing, or choking manually by hand. 
  • This carburetor replaces the Kohler/Carter #30 Carburetor. Also replaces Walbro WHG #60 and WHG #64 Carburetor.
  • It has a 30mm/1.2" Diameter Throttle Bore
  • Replaces Kohler 47 853 23-S and many more

Our carburetor is fully adjustable, re-buildable, and feature brass floats. 

This Carburetor includes:

  • Straight Style Choke Lever (Installed) (Choke Lever Style 2)
  • Triangular Shaped Choke Lever with tab(Choke Lever Style 3)
  • Fuel Elbow
Regarding the Throttle Ball:
 
The top of our throttle lever has a Ball Joint.  If your original carburetor is from a Magnum Engine or is a Walbro made carburetor your carburetor may just have a hole with a little plastic bushing. If you would like to continue using the plastic bushing you can simply remove the ball from my throttle by filing the underside of the ball (It is press riveted on) and remove it, or you can use an adjustable throttle linkage that snaps into the ball. We sell the adjustable linkage here 


View AllClose

100 Reviews

  • 5
    Carburetor

    Works perfect! A slight adjustment to the high speed mixture and the old Koehler runs like new.

  • 4
    First carburetor had a problem contacted I save tractors they replaced it with a new one no problem. Everything works like it should now. Been using the tractor have not seen any gas leaking. Thanks again.

    Thanks for your help. Will be sending defective carburetor back to you

  • 5
    Carburetor

    Excellent replacement - worked perfectly right out of the box

  • 5
    great carb

    i have 3 toro wheelhorse 314-8 put carb on runs great no adjustment needed

  • 5
    Carburetor worked great right out the box

    Tractor started right up works great

  • 5
    K361 CArburetor

    Excellent carb, 2nd one purchased, has correct choke linkage for a 1650

  • 5
    carburetor

    The carb works perfectly, my Wheel Horse never ran so good. I found that if you use a 1/4 drill bit when you slide out the choke lever. It keeps the spring and detent ball in place so that it doesn't fall out and get lost. It make switching the choke lever fast and simple.

  • 5
    #30 Carburetor

    Works great

  • 5
    Just what I needed

    Tractor runs great. No problems on installing

View AllClose