Carburetor Bundle Pack for K241, K301, M10, and M12 Engines

Was about nuts looking for replacement for 1995 Gravely 12HP Professional M-12 walk behind. Kohler recommended this company. ISaveTractors are great to work with. Had to modify linkage slightly. Tractor runs fine now.

I did have to bend the Gov. to carb. linkage, as it is not a true 90º bend., a simple fix. Also had to drill out the hole in the choke lever, as it was too small to accept the heavy gauge cable. Also a simple fix. Overall, I am very pleased with the purchase. Tractor started right up, and idled great, with no adjustments.

I installed this kit easily. It took a couple of hours at a leisurely pace. I think if I pushed up the, fixing other things cleaning grease etc, I could easily do it in half an hour. I also installed a new sediment bowl at the same time. Everything seemed to be high quality and fit just like the original. Tractor fired right up but would run good coming off idle. One quick turn of the high speed adjustment and it’s way better than the old carb. This is on a cub cadet 125 with a Kohler engine. The old carb was so bad that the tractor wouldn’t stay running below about 1/3 throttle. Now it operates perfectly through the entire range. Thanks for the high quality fix at a reasonable price. The only thing I’d add to the kit is another 1/8” pipe to 1/4” barb fitting. Since my tractor originally had hard lines and no inline filter, I needed to run downtown to get this one part to complete the job with the new rubber hose, shutoff and filter.

The new carburetor has shoulders on left and right sides that partially covers the slots where the bolts fasten the carburetor to the engine making it very hard to fasten the carburetor to the block. The original carburetor did not have these shoulders. Also what holds the throttle rod to the governor arm? I looked several times through the box and could not find anything to hold the throttle rod to the governor arm. Otherwise everything is running very well. I still have to make some minor adjustments. I will refer this site to any one that needs parts for any small gas engine. I might send you pictures of the parts mentioned in this review.

Fit great, however needed a little modification when the metal air filter cover was installed. Not enough clearance for throttle and governor to function properly. This went on a very old 210 John Deere mower with a Kohler engine.

I have owned a 1968 Wheel Horse Raider 12 for over 11 years now. I had rebuilt the carb twice but age and wear finally took its toll. I ordered the K301 Bundle pack from ISAVETRACTORS and received it two days ago. I installed it the same day. I removed the "L" shaped fuel elbow and installed my brass fitting in the carb and everything bolted right up. I attempted to start my tractor with the carb settings as they were shipped. It fired right up. I made some minor adjustments on the Hi and Lo screws and now my WH appears to be running great again. If you need a carb for your tractor, I'd recommend these carburetors. Thanks Norm!

Excellent product and consumer contact.

I wish it was a bit cheaper price.

I left a message the day before. Very nice gentleman called Me back. I explained to him what I was looking for. Gave me all the advise I needed and I purchased. Installed yesterday. Works great.