Carburetor #26 For Kohler K241, K301, M10, M12 Engines

I bought this carburetor for my Gravely 12G riding Lawn mower that is 32 years old. The carb was delivered to me within 3 days in excellent condition. I switched the old one with the new and it worked right out of the box needing no adjustments whatsoever. I am writing this review after cutting my 2 acre lawn 4 times with iSave carb onboard - works perfectly. Prior to using this iSave carb I tried 3 different after market units all of them failed ,then I came across the iSave website in my search, and I am glad I did. The carb worked just like it says on the website it's machined perfectly & it works well. I will buy all my hard to find tractor parts from them now on wards. Thanks ISAVETRACTORS.

This carburetor fit my John Deere 212 after I trimmed the throttle arm back to the swaged control attachment ball to match the original carb. I adjusted it per the included instructions, and it ran like a champ. Very reasonably priced compared to the John Deere version (which isn't available anymore). My tractor has been saved. Thanks.

I was looking at purchasing a new carburetor for my Kohler 310 engine on my Gravely Walk Behind Tractor. I looked at multiple sites that sold the unit. I checked out the reviews from your site and that helped make my decision to purchase it from iSaveTractors.com. I installed the carburetor and just as the reviews stated, it started right up with the engine in low idle. I was really impressed. After the engine ran for about 10 minutes, there was very little adjustments to make at low and high throttle. My Gravely tractor never ran better. Great product!!

I purchased my Cub Cadet carb and fuel sediment bowl. Received them within 3 days and installed. I had a technical mental problem while trying to set the carb/ gov linkage. I called and left a message after hours yesterday and received a return phone call a little while ago asking for assistance and thoughts concerning the issue. Problem was after install the cable the carb and gov would not move. After some brief discussion and the probable cause being "I may have just over looked something". Immediately went back out to take a look at it after a good nights rest and reassurance from you. THe results was embarrassing. Being a disabled vet with minimal use of my hands and arms I had to use wire to wrap around the clutch/ brake/ safety pedal to hold it down. Since I was not starting the tractor sitting at the seat and looking at the control upside down I had inadvertently had the throttle lever all the way in the down position (slow) thinking it was the fast position. This was causing the cable to bind since there could be no movement because the butterfly arm was already pushed up against the adjustment screw. As soon as I realized this I loosened the screw holding the cable in place and moved the throttle linkage and lever to the "fast" position, secured the cable and low and behold after priming the old cubby fired right up. It is very great to see and know of a company who not only sells parts but understands the functionality of the equipment/ engines the parts are attached to. Once again, a huge THANK YOU to you guys. That is stand up customer service. If you do have a way to post this feel free to do so. JR Dibble ~ Alabama

I installed this on a 1979 Simplicity 7010 lawn tractor. It has been sitting since 2005. This will be hard to believe, but the tractor started in less than 2 minutes!!! Mows and idles nicely, for an old hoss! Don't know why I waited so long.......

Good carb. Pain in the butt to tighten down. Other then that it runs great

So I called earlier and left a message. I actually got a phone call back from Norman. What a surprise now a days. He walked me through my issue and 1 minute later my carb was ordered. All I can say is that is what service should be. I will only be dealing with them for now on. Thanks for all the help norman

This is on a Deere 212 with a 12hp K301. Works great right out of the box. Made the high-speed and low-speed adjustments and runs great. Like others have mentioned, had to trim a little bit off the throttle linkage on top to clear the air cleaner but other than that runs perfect.

The new carburetor worked perfectly out of the box. I did have to grind down the additional length on the throttle arm that would be where a cable would attach. Other than that it was perfect. Tractor fired up right away, and runs better now than ever.