By Engine Model

IST brand Crankshaft Bearings for your Kohler K Engines! These match Kohler OEM Specs and are High Quality Replacements.    Sold by the pair   These will fit the following Kohler Engines: Kohler K241, K301, K321, K341 Kohler M10,...

This is a new aftermarket Regulator Rectifier for Kohler K Engines with a 15 amp charging system. This is a heavy duty high quality replacement for the original Kohler Regulator Rectifier. The three leads are AC -, B+, AC+ The two AC leads go to your...

Stopping cleaning the floor of leaking oil and replace your oil seals!   High Quality Aftermarket Oil Seal set for Kohler K241 - K341 Engines.   Includes 2 seals: one for the PTO side, and one for the Flywheel Side   Replaces Part...

iSaveTractors brand aftermarket Piston Kit for Kohler K301 Engines. This is for 12HP Kohler K Series Cast Iron Engines. This piston will also work for the K532 Engine as well.Includes Piston, Rings, Wrist Pin, Wrist Pin Retainer...

iSaveTractors brand aftermarket Piston Kit for Kohler K161 and K181 engines.   This is for 7HP and 8HP Kohler K Series Cast Iron Engines.Includes Piston, Rings, Wrist Pin, Wrist Pin Retainer Clips Replaces  Kohler...

iSaveTractors Carburetor Rebuild Kit for Kohler K and M Engines  Includes Float Bowl Gasket, Diaphram, Float Needle, Float Needle Seat, Nut Gasket, and Float Pin. This kit is for the Kohler/Carter style carburetors #16, #26 and #30 found on K141,...

Ignition Key switch for Battery Ignition Kohler K Series Engines. This is a 5 Terminal, 3 Position Ignition Switch. Works for all Vintage Garden Tractors,  Kohler K Engines, and other small engines that use a battery ignition system. The...

Exhaust Valve for Kohler K141, K161, and K181 Engine  This is a 1 1/8” Diameter Valve Head.  Made from heat resistant alloy. Replaces: Kohler 230027S and others

Intake Valve for Kohler K141, K161, andK181 Engine This is a 1 3/8” Diameter Valve Head Replaces: Kohler 230582S and others

Intake Valve for Kohler K241, K301 10HP 12HP Engines. Also fits Kohler Magnum M10, and M12 EnginesThis is a 1 3/8” Diameter Valve Head.  Replaces: Kohler 235582S

Exhaust Valve for Kohler K241, K301, and older style K321 Engines** Made from heat resistant alloy. These also fit Kohler K482 18HP Cast Iron Engines.**Note: This exhaust valve will fit the older style K321 Engines with the smaller exhaust valve. If your...

Exhaust Valve for Kohler K321* and K341 14HP, and 16HP Engines. Made from heat resistant alloy. These also fit the Kohler K532, K582 Engines 20HP through 23HP.**Note: This exhaust valve will fit the newer style K321 Engines with the larger...