Ultimate Engine Rebuild Kit Kohler K321 14HP

(15 reviews) Write a Review
Frequently bought together:


This is the ultimate engine restoration kit for Kohler K321 Cast Iron 14HP Engines with Battery Ignition Systems.
It includes everything you need to make your engine run like brand new again!
There is no other rebuild kit available as comprehensive as ours.
  • 20 Piece Gasket Set including Oil Seals
  • Intake and Exhaust Valves*
  • Piston 
  • Piston Rings
  • Wrist Pin and Clips
  • Connecting Rod 
  • Carburetor
  • Carburetor Ball Joint Throttle Linkage
  • Additional style carburetor choke for old style engines
  • Points w/mounting bracket and Condenser
  • Ignition Coil with mounting bracket
  • Crankshaft Bearings
  • iSaveTractors Sticker

*Note: The exhaust valve on K321 come in 2 variations. Older style engines came with an exhaust valve that is smaller than the intake valve. The valve head measures 1 1/8" Diameter. Newer style engines came with the exhaust valve the same size as the intake valve and measures 1 3/8". 

View AllClose

15 Reviews

  • 5
    engine rebuild kit

    Posted by Mike on Jul 5th 2018

    Quick and courteous service.Highly recommend.

  • 5
    ultimate rebuild kit kholer k321 14 hp

    Posted by Rick Hobbs on Apr 30th 2018

    received order quickly tractor is now running like a sewing machine

  • 5
    Good quality parts in kit

    Posted by David Green on Apr 11th 2018

    I had great service and would highly recommend them.

  • 4
    Great Customer Service & Quality Product

    Posted by Unknown on Dec 18th 2017

    This is the second time to rebuild this engine, but the first time I used My initial attempt to rebuild my K-321 did not last long, as it quickly suffered a rod failure (less than 5 hrs.). This time I discovered that the bore and crank tolerances were out of spec and I had the cylinder bored .01 over and the crank ground down to .01 under. After completing the installation of the rebuild kit and reinstalling the motor, the engine ran like it did years ago. There was a noticeable difference from the previous rebuild. The engine ran much smoother. I did have trouble setting the governor adjustment, and found the factory service manual somewhat misleading. Once I did a quick internet search regarding the runaway at high idle, I found a forum post that explained the governor arm adjustment in much better detail. Now I have a good as new k-321 powered 1980 Power King Tractor. Possible kit improvements would be including a new spark plug and wire, and better instructions for installing the supplied piston rings into the piston. there are two different profile rings and their orientation and location were not clear from the info sheet included. The customer service team was very helpful in determining the specifics of my kit (connecting rod size, bore size, and exhaust valve size). Thanks for a quality product and true customer service that is hard to find.

  • 5
    Great Value

    Posted by Patrick Blodgett on Jul 25th 2017

    I cannot wait to get this engine back together and try it out. I love the fact that I got a new carb and coil with this rebuild kit. If all goes well I will buy every rebuild kit from here and tell everyone of the great value I got. Thanks.

  • 5
    Perfect kit for restoring your old tractor.

    Posted by Unknown on Apr 10th 2016

    I bought this to restore my 1973 Cub Cadet 149 garden tractor. It arrived very quickly and has brought new life to my old tractor. I would definitely recommend this rebuild kit. It comes with all the necessary parts to get you back and running.

View AllClose