Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19

Just mounted new carb on 5/18, Starte right up made a little adjustment and it runs beautiful. Have bought other parts from you and they work great. Keep up the supply of parts , we all depend on you and your good work. Tom.

After a small adjustment engine runs great. Choke arm shorter than original, but still works ok.

I did switch out the butterfly valve from my old walbro to the replacement carburetor because the rod linkage hole was to small didn't want try and drill it bigger on new one for the plastic retainer to fit. Runs fine

It needed a bit of adjustment but that was because of the engine, not the carb. Great product.

This carb performed as advertised. This is the first carb that I've purchased online that actually works. Until now I was 0 for 2 on carbs purchased online through other vendors. I installed this one, it fired right up and the only adjustment I had to make was backing off the idle screw one turn. Thanks ISaveTractors

Kohler M18. Initial tune was very good. Made some minor adjustments for idle and mix, as expected. Would be helpful if included instructions detailed which screw was which. I had factory manual, so easy to research. Did require drilling out the throttle arm to be able to accept the OEM linkage retainer clip. Tractor runs great, and can be started easily with little to no choke. All-in-all, quite satisfied.

I put this on 71 kohler m 18 twin on my log splitter. Hit the key and took right off , purred like a cat. My friend Mike from Richmond VA. gave me this site years ago. With out them I would be in trouble

Worked great

Worked great right out of the box on my Kohler M18 twin.