iSaveTractors
Carburetor #16 for Kohler K90 K91 K141 K160 K161 K181 & M8
- SKU:
- CAR01005
- UPC:
- 8809093341937
Description
iSaveTractors brand carburetor to replace carburetors in Kohler K90, K91, K141, K160, K161, K181, and M8 Magnum Engines!
- It is a replica of the Carter #16 Carburetor and has a .810” Throttle Bore.
Our carburetor is fully adjustable, re-buildable, and feature brass floats.
This carburetor comes with 2 choke levers. The choke installed is for the K Series engines, and the inlcuded one is for the Kohler Magnum M8 engine. Installation instructions included.
* Customers have also sucessfully installed this carburetor onto Tecumseh HH100, HH120, and HH140 Engines replacing their original Walbro LME carburetors. The bolt holes line up and just the throttle and choke linkages need to be slightly modified.
Replaces:
- 46 853 01-S
- 46 053 03-S
Intake mounting and air filter side gasket not included. You can purchase it here and here
79 Reviews
-
Kohler K161 carb
Arrived and looks great. Haven't yet installed it but should work just fine. Thanks.
-
Aftermarket carburetor for k161
Dispite of minor additional work needed to make this carburetor work well for my kohler rotor tiller K161T model is well worth the time and money paid for. Thank you for your service!
-
Good product
This is one of the best aftermarket products I've ever purchased. Only had to enlarge one of the governor rod holes in the throttle shaft lever to mount it. Engine started right up and ran excellent. It would be nice to have a mounting gasket included with the carb. The only problem I encountered was in mounting the air cleaner base. The left lower mounting hole was not tapped. I don't think the hole is even the right size for the proper tap. I just used a self tapping screw, not a big deal. I would definitely recommend these products for others to buy. (carb was installed on a K181)
-
Excellent results
Very pleased will recommend
-
After market parts
I was very pleased to be able to get parts for an engine this old. I have this K181 engine on an old Gibson tractor. I put the carb on and it runs well.
-
New #16 Carb does the trick
I have 2 B-60 Wheel Horse garden tractors that run pretty good , but don't idle without the choke on. So I ordered this new carb and a rebuild kit as well. I swapped out the old carb lickity split and change the piece of fuel line from the fuel pump to the carb as well. The tractor stared easily with its preset adjustments and took minimal adjusting to make it run like new I was amazed. Sometime soon I'll rebuild the old one and replace it on the second B-60. I feel now excessive wear in the throttle shaft and think it will be like new as well . If not Ill order another carb swap it out as well. I have ordered one for a 12 horse Kohler I have on another wheel horse and expect the results will be as good.
-
Overall pretty good
As far as adjustment went the carb needed very little adjustment in order to run great. Everything bolted uo nicely. Did have to modify the holes for the governor arm and put a spacer behind it though because the arm was too long. Other than that it did great. With no adjustment at all the tractor fired right up after putting it on. Would buy them again. Good quality for the price
Related Products
Related Products
Crankshaft Bearings for Kohler K141, K161, K181, M8 Engines
iSaveTractors
Connecting Rod for Kohler K141, K160, K161
iSaveTractors
Intake Valve for Kohler K141, K161, K181
iSaveTractors
Exhaust Valve for Kohler K141, K161, K181
iSaveTractors
Air Filter for Kohler K91, K141, K161 - 230840S
iSaveTractors
Spark Plug for Kohler K141, K161, K181 Engines
Champion
Oil Seal Set for Kohler K141, K161, K181 Engines
iSaveTractors
Carburetor Intake Gasket for Kohler #16 Carburetor K91 - K181
iSaveTractors
11 Piece Engine Overhaul Gasket Set for Kohler K141, K161, K181
iSaveTractors