Kohler K341 / M16

iSaveTractors brand Points Push-rod for Kohler K Series Engines   Replaces: Kohler Part: 4741104-S  

  Starter Solenoid  5/16" Posts for Starter circuit. 1/4" Posts for low amp activation circuit. These solenoids have 2 small terminals. One terminal is for the 12v activation circuit from your key switch, and the other is for ground...

  Wire this switch into your electric PTO and starter circuit to allow you to safely activate your electric PTO. This switch will allow you to turn on your electric pto when your tractor is running, but make it so your tractor cannot be started if...

  High quality spark plug cable kit for your small engine equipped with a battery ignition system. Includes: 7mm Low resistance Ignition Cable  Spark Plug Boot and Connector Connector for Ignition Coil already installed Cable is 24"...

iSaveTractors Valve Guide for Kohler K241, K301, K321, K341, K482, K532, and K582 Engines. Will also Fit M10, M12, M14, M16 Magnum Series Engines. Specs: ID: 0.309" OD: 0.625" Length: 2.129" Replaces: Kohler:...

Universal Wiring Harness with 5 Pin Connector Will fit most Vintage Garden Tractors with 5 prong 3 position Key Switch 5 Colored Wires: Black, Blue, Red, White, Yellow

High Quality Universal Starter Solenoid for Small engines and Vintage Garden Tractors. The high amp posts are 5/16". Works with all small engines.  These solenoids have 2 small terminals. One terminal is for the 12v activation circuit from your...

  High Quality Universal Starter Solenoid for Small engines and Vintage Garden Tractors. The high amp posts are 1/4". Works with all small engines. These solenoids have 2 small terminals. One terminal is for the 12v activation circuit from your...

  Stopping cleaning the floor of leaking oil and replace your oil seals!   High Quality Aftermarket Oil Seal set for Kohler K241 - K341 Engines.   Includes 2 seals: one for the PTO side, and one for the Flywheel Side   Replaces...

Ignition Key switch for Battery Ignition Kohler K Series Engines. This is a 5 Terminal, 3 Position Ignition Switch. Works for all Vintage Garden Tractors,  Kohler K Engines, and other small engines that use a battery ignition system. The...

  Exhaust Valve for Kohler K321* and K341 14HP, and 16HP Engines. Made from heat resistant alloy. These also fit the Kohler K532, K582 Engines 20HP through 23HP.**Note: This exhaust valve will fit the newer style K321 Engines with the...

  Aluminum Head Gasket for Kohler K341 and M16 Engines Same High Quality Head Gasket we use to rebuild dozens of tractors per year! Replaces  Gravely 034775  Kohler 4504117S  Kohler 4504117  Kohler...