Kohler K341 / M16

  iSaveTractors Long Valve Spring for Kohler K241, K301, K321, K341, K482, K532, K582, M10, M12, M14, and M16 engine models. This spring has a spring height of 1.850". This valve spring is used for valves that do not use a valve rotator. Suitable...

  iSaveTractors brand aftermarket gasket for the breaker points cover for Kohler K series engines. This gasket fits all Kohler K series engines that use a breaker point ignition system.  Kohler K91, K141, K161, K181, K241, K301, K321, K341,...

  iSaveTractors Rubber Grommet for the points cover on your Kohler K Series Engines. Will fit all Kohler K Series Engines that use an ignition point system...

  Carburetor Gasket set for the following engine models: K241, K301, K321, K341, K361, K482, K532, K582 M18, MV18, M20, MV20 KT17, KT19 Includes 3 different styles of Air Filter Housing Gasket, and 1 Intake Mounting Gasket.  

  Adjustable Throttle Linkage for Kohler K Series Carburetors with Ball Joint on the throttle arm. 3/16" e-clip included. Replaces: Kohler 45 208 03-S  Kohler 235277-S

  Aftermarket Plastic Throttle/Governor Bushing for Kohler K Series Carburetors. Replaces Kohler Part: 2515811S

iSaveTractors brand Points Push-rod for Kohler K Series Engines   Replaces: Kohler Part: 4741104-S  

This is a new aftermarket gasket for your carburetor. This gasket goes in between the intake of your engine and the throttle side of your carburetor.   This gasket is about 1/4" thick and is designed to keep the heat from the engine away from...

  Wire this switch into your electric PTO and starter circuit to allow you to safely activate your electric PTO. This switch will allow you to turn on your electric pto when your tractor is running, but make it so your tractor cannot be started if...

  These are High Quality steel shim spacers for your Kohler K and M series Engines. Correct your end play in your camshaft and balance gears with these shims.   Shims are .005" thick    These will fit the following Kohler...

  High quality spark plug cable kit for your small engine equipped with a battery ignition system. Includes: 7mm Low resistance Ignition Cable  Spark Plug Boot and Connector Connector for Ignition Coil already installed Cable is 24"...

Universal Wiring Harness with 5 Pin Connector Will fit most Vintage Garden Tractors with 5 prong 3 position Key Switch 5 Colored Wires: Black, Blue, Red, White, Yellow