Internal Engine Parts

  iSaveTractors Long Valve Spring for Kohler K241, K301, K321, K341, K482, K532, K582, M10, M12, M14, and M16 engine models. This spring has a spring height of 1.850". This valve spring is used for valves that do not use a valve rotator. Suitable...

iSaveTractors Rubber Grommet for the points cover on your Kohler K Series Engines. Will fit all Kohler K Series Engines that use an ignition point system...

Kohler OEM Valve keepers for Kohler K141, K161, K181, K241, K301, K321, K341, M8, M10, M12, M14, M16, MV16, M18, M20, K482, K532, K582 Engines. Kohler Part Number: 4175510S

iSaveTractors brand Points Push-rod for Kohler K Series Engines   Replaces: Kohler Part: 4741104-S  

These are High Quality steel shim spacers for your Kohler K and M series Engines. Correct your end play in your camshaft and balance gears with these shims.   Shims are .005" thick    These will fit the following Kohler...

iSaveTractors Valve Guide for Kohler K241, K301, K321, K341, K482, K532, and K582 Engines. Will also Fit M10, M12, M14, M16 Magnum Series Engines. Specs: ID: 0.309" OD: 0.625" Length: 2.129" Replaces: Kohler:...

  Oil Pan Gasket for Kohler K241, K301, K321, K341 Engines. Will also fit M10, M12, M14, M16 with wide base engine block. This gasket is for wide base engine blocks Replaces Kohler: 235057 235057S

Needle bearing set for the Balance Gears in your Kohler K Engine. If you are rebuilding your engine and it is equipped with the balance gears you want to replace these bearings too! Replaces Part Number:  47 030 01-S  These style...

Stopping cleaning the floor of leaking oil and replace your oil seals!   High Quality Aftermarket Oil Seal set for Kohler K241 - K341 Engines.   Includes 2 seals: one for the PTO side, and one for the Flywheel Side   Replaces Part...

iSaveTractors Carburetor Rebuild Kit for Kohler K and M Engines  Includes Float Bowl Gasket, Diaphram, Float Needle, Float Needle Seat, Nut Gasket, and Float Pin. This kit is for the Kohler/Carter style carburetors #16, #26 and #30 found on...

Exhaust Valve for Kohler K241, K301, and older style K321 Engines** Made from heat resistant alloy. These also fit Kohler K482 18HP Cast Iron Engines.**Note: This exhaust valve will fit the older style K321 Engines with the smaller exhaust valve. If...

Exhaust Valve for Kohler K321* and K341 14HP, and 16HP Engines. Made from heat resistant alloy. These also fit the Kohler K532, K582 Engines 20HP through 23HP.**Note: This exhaust valve will fit the newer style K321 Engines with the larger...