Kohler Carburetor #26 For Kohler K241, K301, M10, M12 Engines
- This carburetor replaces the Kohler/Carter Number 26 Carburetor and the Walbro WHG 52 Carburetor
- It has a 26mm/1.07" Diameter Throttle Bore
- Replaces Kohler 47 853 30-S and many others
Our carburetor is fully adjustable, rebuildable, and feature brass floats.
This Carburetor inclues:
- Straight Style Choke Lever (Installed)
- Triangular Shaped Choke Lever with tab
- Fuel Elbow
*Mounting gaskets are not included. To purchase them, click here.
Fast service, worked as soon as gas was on. Old Gravely has a new life. Called right back when I had a question.
Carb bolted on perfectly little tight to fit the carb mounting bolts with lock washers no problem otherwise just had to walk 2 bolts in together.
Runs great tuned up easy.
Have been buying parts from ISAVETRACTORS for a wile with no issues.
Would like new gaskets with a new carb though verses buying separately
Had to do some modifications to choke hole was to small for choke rod but a bigger drill bit fixed that. Was for Dads old wheel horse he says it runs better now than when it was new.
Cold not use the ball linkage. It made the motor rev up and down. Put the stock linkage in and ran fine.
used this on my grasshopper 1212
Carb works great!
Solved a long going fuel issue.
Very pleased with my purchase
I found about this site by accident. I called and spoke with a very knowledgeable young man and ordered this carburetor on a Monday. He advised that it should arrive no later than Thursday. Through NO fault of I Save Tractors it did not arrive until early Saturday morning. The tractor this piece was for is at a different location than my home, so the postal service kind of put me behind the eight ball. I was able to get the carburetor installed and adjusted. The engine runs very good. I attempted to install the air filter and ran into a little trouble. I bought this tractor second-hand so I do not know what, if any of the air filter assembly may not have been on this engine originally. I had to cut a small portion of the "throttle body" off near the "ball" on the top so t would clear the back of the air filter when opening the throttle. Not a big deal, just a little aggravating. The top mounting hole for the air filter backing plate lined up correctly, but the remaining two (on the backing plate) holes needed to be drilled to line-up with the holes in the carburetor. Again, not a big deal, as just locating a replacement carburetor was not terribly easy.
The service from I Save Tractors was exceptional. The only reason for four instead of five stars was due to the "modifications" I had to do. The carburetor works flawlessly so far.
I would definitely buy form I Save Tractors again.
The carburetor was a perfect fit and the quality looks great,also purchases all iginiton parts for my John Deere 112 with a K301 and all parts were high quality and a perfect fit.