Kohler Carburetor #26 For Kohler K241, K301, M10, M12 Engines
- This carburetor replaces the Kohler/Carter Number 26 Carburetor and the Walbro WHG 52 Carburetor
- It has a 26mm/1.07" Diameter Throttle Bore
- Replaces Kohler 47 853 30-S and many others
This Carburetor inclues:
- Straight Style Choke Lever (Installed)
- Triangular Shaped Choke Lever with tab
- Fuel Elbow
Prompt shipping, Good directions, Runs great with no adjustments.
I purchased this carb to replace the original Walbro in my 89 Ingersoll with a Kohler M12. The only modifications were grinding off the ball/socket joint on the linkage so I could use the original linkage/cable. I installed new gaskets, bolted her up and she fired up instantaneously. I'm very happy that I decided to purchase a new carb as the original was almost 30 years old. I sent Norman an email prior to purchasing to confirm it would fit without any major modifications and he replied the same day. He shipped the part same day and I received it within 2-3 days. Thanks again for the excellent service and I will do business with you in the near future.
I used this #26 on a Kohler K301AQS. Carb fit fine, engine fired right up and ran without having to make any adjustments. Norm, the only problem I had was with the throttle lever. The governor link is the ball joint type, which worked fine. The problem is the lever is a little longer and has a hole in the end for a cable speed control, so you can use it with either type. When you mount the air cleaner base to the carb the extra length of the arm contacts the a/c base and the throttle can't turn. Not to big a deal, just have to trim the
end of the lever off with the cable hole in it. It would be nice if you would include this step in your instruction sheet, as you need to have the carb off the engine to do a nice job. This is the second carb I have bought from you and I've been showing everyone your web site.
the right carb for my engine, didn't need to adjust it , works just fine , came with all the parts needed to install
Received , installed on a WALKER Mower with a M16 Kohler engine, turn the key and here it goes. What else can I say.....
This carb replaced the Walbro on my J-D, bolted on and ran fine with no adjustments. I did have to fill the float bowl, the gravity feed and cranking that tired engine wouldn't pull fuel, but once I had gas in the bowl it fired up perfectly.
Great shipping and value from isavetractors!
Prompt shipping, actually had instructions on how to calibrate carb both for idle and wide open. Don't usually get that. Great price.
i purchased this carburetor to replace the old one on a 1970's model POWER KING tractor and it was an exact match. Right out of the box it worked perfect.Shipped to south central GA. in just a couple of days. The price was great,much cheaper than other places.
Carb worked great right out of the box. No tuning necessary. Price is fantastic. Would definitely buy again.