Ignition Coil for Kohler K Series Engines Battery Ignition

(5 reviews) Write a Review
SKU:
IGN01002
UPC:
8809093341999
  • Ignition Coil for Kohler K Series Engines Battery Ignition
  • High Quality Copper Primary and Secondary Windings in the ignition coil
  • Ignition Coil for Kohler K Series Engines Battery Ignition
  • High Quality Copper Primary and Secondary Windings in the ignition coil
$34.99

Description

Same High Quality ignition coil used in our professional rebuilds! 

Will fit all Kohler K engines that use a battery ignition system. Will fit Kohler K91 K141 K161 K181 K241 K301-K361. This coil has a 3 ohm resistance in the primary coil. Insulated Copper Windings

Replaces: 

  • Kohler 4151921S 
  • Kohler 231281S 
  • Kohler 231281 
  • Kohler 4151921A 
  • Ariens 20355500 
  • Gravely 022152 
  • John Deere AM38411

* We recommend you inspect and replace your spark plug cable and spark plug for wear or damage. A spark plug and cable with high resistance can lead to excess voltage in the secondary winding in your ignition coil and cause premature failure.

Spark Plug Cable Kits can be found here:

http://isavetractors.com/spark-plug-cable-kit-for-ignition-coil/

Ignition System Bundle Packs:

http://isavetractors.com/ignition-system-bundle-for-kohler-k241-k301-k321-k341-k361/

 

View AllClose

5 Reviews

  • 5
    Old girl running great again

    Posted by Bob on Oct 25th 2017

    I bought a coil after purchasing points, condenser and coil wire recently. I was hoping the coil wasn't bad but it was. Was a perfect fit. I put it on a 1966 Cub 123 I recently got that was my Dad's from new. I'm happy to have her up and running again. I have been very pleased with the parts and service and will use isavetractors again. Thanks for everything.

  • 5
    Read the instructions

    Posted by Jerry Graf on Oct 23rd 2017

    I purchased an ignition bundle kit for my Kohler 301 engine, it arrived in a few days and was easy to install, this engine is 33 years old and everything was original. Ran great for about 4 months then died, found no spark at the plug, everything was good up to the coil. Contacted I Save Tractors, told them what reading I had found and asked for help, Norm responded with a phone call the next business day, I missed it unfortunately, so we started e-mail correspondence. Norm told me several things to check and that since I mentioned the condenser was attached to the Positive post of the coil said that could have lead to it's early demise. I found the instructions that came with the kit and sure enough the condenser wire is attached to the Negative post of the coil. Since I made the error, I thanked Norm for his help and the great customer service he provides, I then placed my order for a new coil. It arrived and the old engine is purring right along, I might add that Norm included a very nice double sided, full color, printed diagram of the ignition system on a Kohler K301, that is now part of the manual file I have on my old Gravely tractor. Thank you Norm.

  • 5
    worked and fit perfect. !!!

    Posted by John Caruso on Apr 5th 2017

    Could not be more happier with all the products I purchased from Norman ! Thank you

  • 5
    Problem Solved

    Posted by Michale on Apr 4th 2016

    When my Kohler K-241 engine quit, a little troubleshooting showed that there was no spark at the cylinder. I first tried new points and condenser. Still no spark. I then tried a new coil and a new plug. That restored the spark and the engine fired right up. All the parts that I bought from I Save Tractors fit perfectly and solved my problem.

  • 5
    Problem Solved

    Posted by Michale on Apr 4th 2016

    When my Kohler K-241 engine quit, a little troubleshooting showed that there was no spark at the cylinder. I first tried new points and condenser. Still no spark. I then tried a new coil and a new plug. That restored the spark and the engine fired right up. All the parts that I bought from I Save Tractors fit perfectly and solved my problem.

View AllClose