iSaveTractors
Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
- SKU:
- CAR01008
- UPC:
- 8809093341715
Description
Our carburetor is fully adjustable, rebuildable, and feature brass floats.
Includes:
- 90 Degree Fuel Elbow
- 2 Style Choke Levers for Universal Fit (Pointing Up, Pointing Down)
- Instructions
Specs:
- 1.07" Throttle Bore
- 0.812" Venturi
- Replaces 52-053-09, 52-053-18, 52-053-28, 52053-70, 5285323-S, 5285329 and many others
111 Reviews
-
Magnum 20 carb
Worked great,had to make a spacer for air cleaner but otherwise easy install
-
M18 replacement Carb
Nice replicated carb. Much nicer than the Chinese Amazon specimens. This one comes with the extra choke shaft, and instructions on how to swap them, which is exactly what I needed. My original carb was a Walbro fixed jet. This one is an adjustable jet and the settings are very touchy. Took some time, and a lot of cranking, until I found the sweet spot where she would run. Still needs tweaking, but its running now, which is what my goal was for replacing the carb. Throttle lever needs some work. Not an exact fit. May try swapping it from the old carb.
-
Carburetor replacement
Carburetor replacement Bolt of this carburetor on and it started right up
-
Carburetor replacement
Carburetor replacement Bolt of this carburetor on and it started right up
-
Retrofit Carburetor
I finished adjusting the low speed and high speed screws (engine running) and went for a drive around the neighborhood. The engine run wonderfully, it also helped adding some fresh gas to the tank. Anyway, I originally installed the new carb with the original throttle blade and shaft due to linkage fitment. Bad idea, engine barely ran, engine seemed to have an intake vaccum leak. Next day pulled out the old throttle blade/shaft, modified (drill out hole) the new throttle shaft top butterfly for a linkage bushing. Re-installed the carb, started up the engine, adjusted low/high speed screws, and the result was stable engine operation. Bottomline, excellent product. The installation videos inspired confidence in terms of product and installation.
-
Worked well with minimum adjustments
Response and support were very good. Can't say if product was competetively priced. Product appeared to be of quality.
-
Carburetor for the 317 Kohler worked and fit great
Perfect fit but had to thread two holes for breather mount
-
carburetor
Bought this for my 87 wheel horse M-18. Runs like a champ again. A +
-
CARBURETOR FOR KOHLER MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
Great service and the part fit perfectly, a one to one swap, and the shipping was super quick.