null

Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19

(111 reviews) Write a Review
SKU:
CAR01008
UPC:
8809093341715
  • Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
  • Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
  • Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
  • Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
  • Carburetor for Kohler MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
$74.99
Frequently bought together:

Description

iSaveTractors aftermarket carburetor for Kohler Magnum and K-Twin Engines including MV16, M17, M18, MV18, M20, MV20, KT17, KT18, KT19
 
This carburetor comes with 2 different style choke levers which allows you to install it on any machine using the Magnum Twin or KT Twin engine. 

Our carburetor is fully adjustable, rebuildable, and feature brass floats.

Includes:

  • 90 Degree Fuel Elbow
  • 2 Style Choke Levers for Universal Fit (Pointing Up, Pointing Down)
  • Instructions

Specs:  

  • 1.07" Throttle Bore
  • 0.812" Venturi 
  • Replaces 52-053-09, 52-053-18, 52-053-28, 52053-70, 5285323-S, 5285329  and many others
Note: Gaskets not included. You can purchase a carburetor gasket set here
View AllClose

111 Reviews

  • 5
    Replacement carb

    Worked great

  • 3
    th new carb for mv20 was not quite the same

    The actual old carb was somewhat different that the new isavetractors version. I had to do minor update on new carb, had prob with new carb, went back to old carb.

  • 5
    Finally a carburator that works????

    Old snapper tractor mower with no ID's, Numbers in ink gone from engine! Magnum 16 is all I had! Ordered carb. from E-Bay, fit but flooded engine! Sent back got another too small not right? Sent it back! Got another right size but flooded engine! Plastic float adjustment did not help???? Ordered from I Save Tractors! Received in fast time! Installed and it started and ran! OMG! Adjusted for good idel like the instructions said! High speed also! Shut down and installed air filter housing! Mowed big area but it died???? Too hot temp was 110 in shade! Took hood off installed air filter from truck? K&N cone filter! Left hood off and we mowed until out of gas! It has started and run several days now! Do not waste your money on China carbs. Buy from I Save Tractors! You get instructions with theirs! You get nothing form China! Lesson learned! PS: This carb Has a brass float! That is best you can buy!

  • 5
    Kohler carburetor

    I have not installed it yet , but it looks great.

  • 5
    performance

    i have a m18 in my old bolens 1800. this carb worked great as a new replacement. runs like a champ again

  • 5
    Best carburetor for Kohler M-18

    Second carburetor I purchased. This time for a Cub Cadet 1862. “Plug and play”. It’s that easy.

  • 4
    Not a direct fit for a M20 in a CC 2072

    The M20 fired right up after install. Idles very well. High speed is hunts a bit, problem I hoped this would fix. Could be a 2nd gov adjustment is needed. The throttle linkage is not for my M20, this carb is set up for a "s" bend at the end of the cable. Mine is a 90 deg bend with a plastic clasp. I had to use throttle rod and plate from Kohler carb. This carb is made in Taiwan, which is "more better" than china.

  • 5
    Replacement carb for m20 kohler

    My old carb leaked badly and I couldn't get it to idle properly. I found a rebuild kit locally that contained some gaskets, a couple needles and seats for 65 bucks. isavetractors had the all new carb for 70 bucks, it showed up 1 day early. Had it installed in 20 min. . Very little adjustments and it runs and idles perfectly. Such a good deal Thank you

  • 5
    Bravo to the designer, exact replacement part.

    Look forward to shop with you all in the near future.

View AllClose